Residential Lifts


The Savaria Telecab17 is a two-stop elevator that travels through a simple floor cut-out for a vanishing elevator effect, leaving you more usable space. Available in two standard sizes – both with a capacity of 384 kg – the lift can typically handle multiple passengers as well as heavier mobility equipment.

With a modular, fully enclosed drive tower which attaches to a support wall, no hoistway is required – so no need to worry about complex, costly installations.

If you are looking for a space-saving, stylish and affordable mobility solution for your home, the Savaria Telecab17 is the answer for you.

Why install the Telecab17?

  • Fully enclosed drive tower designed for safety and aesthetics means that no hoistway or pit is needed
  • Two stops and up to 7 m of travel
  • Two standard cab sizes to choose from: 762 mm x 1168 mm, or 914 mm x 1372 mm
  • Rust-resistant powder-coated aluminum frame (white) with clear acrylic window panels
  • Constant pressure controls for operation with keyless or keyed access on car and call stations
  • Cab top sensor stops the unit from moving when pressure is detected
  • Left or right hand opening door; hydraulic door closer
  • Safety features include: interior lighting, emergency stop and alarm buttons, battery lowering in case of power failure as well as manual emergency lowering, telephone, non-skid platform, underpan sensor to stop the unit if it meets an obstruction, pressure relief valve to prevent platform overload, door interlock, and slack chain safety device
  • Optional battery power for up to 5 trips up and down, in case of power failure


  • 3 years limited parts warranty (conditions apply)
Technical Specifications
ApplicationsResidential, indoor
Capacity384 kg
Maximum travel distance7 m with 2 stops
Cab SizesW762mm x L1168mm x H2032mm
W914mm x L1372mm x H2032mm
Speed0.1 m/s
Floor cut-out1537 mm x 895 mm for 762 mm x 1168 mm cab
1740 mm x 1048 mm for 914 mm x 1372 mm cab
Minimum overhead required 2438 mm to have 150 mm minimum clearance by code
2337 mm where code permits
Drive2:1 roller chain hydraulic
Motor/pump24 VDC, 3 hp (2.1 kW), gear type hydraulic pump
Warranty36 months parts, ask for details